Ecmd Reference: Unterschied zwischen den Versionen
K |
(adapt to current GIT) |
||
| Zeile 1: | Zeile 1: | ||
| − | ''This page is automatically generated from ecmd_defs.m4 and wiki.m4 which are part of the Ethersex source code repository. Do not edit this page but send | + | ''This page is automatically generated from ecmd_defs.m4 and wiki.m4 which are part of the Ethersex source code repository. Do not edit this page but send patches for those files!'' |
== Network configuration == | == Network configuration == | ||
{| border="1" | {| border="1" | ||
| Zeile 5: | Zeile 5: | ||
| ''Short description'' | | ''Short description'' | ||
|- | |- | ||
| − | | mac | + | | mac [xx:xx:xx:xx:xx:xx] |
| − | | Set the MAC address. | + | | Display/Set the MAC address. |
|- | |- | ||
| − | | | + | | version |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| Display the version number. | | Display the version number. | ||
|- | |- | ||
| − | | ip | + | | ip [IP] |
| − | | Set the IP address. | + | | Display/Set the IP address. |
|- | |- | ||
| − | | netmask | + | | netmask [IP] |
| − | | Set the network mask. | + | | Display/Set the network mask. |
|- | |- | ||
| − | | gw | + | | gw [IP] |
| − | | Set the address of the default router. | + | | Display/Set the address of the default router. |
|- | |- | ||
|} | |} | ||
| Zeile 43: | Zeile 31: | ||
| wdreset | | wdreset | ||
| Go into endless loop to trigger a watchdog timeout. | | Go into endless loop to trigger a watchdog timeout. | ||
| + | |- | ||
| + | | ipstats | ||
| + | | Display IP statistics. | ||
| + | |- | ||
| + | | free | ||
| + | | Display free space. | ||
|- | |- | ||
|} | |} | ||
| Zeile 56: | Zeile 50: | ||
| Load values from eeprom | | Load values from eeprom | ||
|- | |- | ||
| − | | channels | + | | stella cron CHANNEL VALUE MINUTE HOUR DAY MONTH DAYOFWEEK |
| + | | Add a cronjob for stella to set the CHANNEL to VALUE. You may use fade channel constants. | ||
| + | |- | ||
| + | | channels | ||
| Return stella channel size | | Return stella channel size | ||
|- | |- | ||
| − | | | + | | moodlight get CHANNEL |
| − | | | + | | Return on if channel CHANNEL is moodlighted |
| + | |- | ||
| + | | moodlight set CHANNEL ONOFF | ||
| + | | Set CHANNEL moodlight on=1 or off=0 | ||
|- | |- | ||
| stella fadestep set FADESTEP | | stella fadestep set FADESTEP | ||
| Zeile 68: | Zeile 68: | ||
| Get stella fade step | | Get stella fade step | ||
|- | |- | ||
| − | | channel set CHANNEL VALUE | + | | channel set CHANNEL VALUE FUNCTION |
| − | | Set stella channel value | + | | Set stella channel to value. The third parameter is optional. You may use 's' for instant set |
|- | |- | ||
| channel get CHANNEL | | channel get CHANNEL | ||
| Get stella channel value | | Get stella channel value | ||
| + | |- | ||
| + | |} | ||
| + | == Cron commands == | ||
| + | {| border="1" | ||
| + | | ''Command syntax'' | ||
| + | | ''Short description'' | ||
| + | |- | ||
| + | | cron_list | ||
| + | | Show all cron entries | ||
| + | |- | ||
| + | | cron_rm POSITION | ||
| + | | Remove one cron entry | ||
|- | |- | ||
| bootloader | | bootloader | ||
| Zeile 170: | Zeile 182: | ||
| Do DNS lookup for HOSTNAME (call twice). | | Do DNS lookup for HOSTNAME (call twice). | ||
|- | |- | ||
| − | | | + | | dns server [IPADDR] |
| − | + | | Display/Set the IP address of the DNS server to use to IPADDR. | |
| − | |||
| − | |||
| − | | Set the IP address of the DNS server to use to IPADDR. | ||
|- | |- | ||
|} | |} | ||
| − | == | + | == NTP == |
{| border="1" | {| border="1" | ||
| ''Command syntax'' | | ''Command syntax'' | ||
| ''Short description'' | | ''Short description'' | ||
|- | |- | ||
| − | | | + | | ntp query |
| − | | | + | | Query the NTP server to get an NTP update. |
|- | |- | ||
| − | | | + | | ntp server [IPADDR] |
| − | | Display the IP address of the | + | | Display/Set the IP address of the NTP server to use to IPADDR. |
|- | |- | ||
|} | |} | ||
| Zeile 195: | Zeile 204: | ||
|- | |- | ||
| time | | time | ||
| − | | Display the current time. | + | | Display the current time in seconds since January 1st 1970. |
|- | |- | ||
| date | | date | ||
| Zeile 219: | Zeile 228: | ||
|- | |- | ||
| kty get [CHANNEL] | | kty get [CHANNEL] | ||
| − | | Get the temperature in xxx.x | + | | Get the temperature in xxx.x °C of CHANNEL or if noch channel set of all channels. |
|- | |- | ||
| kty cal get | | kty cal get | ||
| Zeile 326: | Zeile 335: | ||
| Re-sync to the camera | | Re-sync to the camera | ||
|- | |- | ||
| − | | pwm | + | | pwm melody |
| − | | | + | | Play melody |
| + | |- | ||
| + | | pwm wav | ||
| + | | Play wav | ||
| + | |- | ||
| + | | pwm stop | ||
| + | | Stop wav | ||
|- | |- | ||
|} | |} | ||
| Zeile 352: | Zeile 367: | ||
| eeprom reinit | | eeprom reinit | ||
| Force reinitialization of the EEPROM config area | | Force reinitialization of the EEPROM config area | ||
| + | |- | ||
| + | | mcuf modul list | ||
| + | | List all modules | ||
|- | |- | ||
|} | |} | ||
Version vom 23. Mai 2009, 10:26 Uhr
This page is automatically generated from ecmd_defs.m4 and wiki.m4 which are part of the Ethersex source code repository. Do not edit this page but send patches for those files!
Inhaltsverzeichnis
- 1 Network configuration
- 2 Resetting the controller
- 3 Stella commands
- 4 Cron commands
- 5 Port I/O
- 6 Named Pin
- 7 HD44780 LCD Display
- 8 Dallas 1-wire
- 9 DNS
- 10 NTP
- 11 Clock
- 12 ADC
- 13 KTY
- 14 Dataflash
- 15 SD/MMC Card Reader
- 16 RFM12
- 17 Miscelleanous
- 18 DC3840 Handycam support
- 19 I2C (TWI)
- 20 FS20 Befehl
- 21 FS20 CODE
- 22 Other Information
Network configuration
| Command syntax | Short description |
| mac [xx:xx:xx:xx:xx:xx] | Display/Set the MAC address. |
| version | Display the version number. |
| ip [IP] | Display/Set the IP address. |
| netmask [IP] | Display/Set the network mask. |
| gw [IP] | Display/Set the address of the default router. |
Resetting the controller
| Command syntax | Short description |
| reset | Reset the Ethersex. |
| wdreset | Go into endless loop to trigger a watchdog timeout. |
| ipstats | Display IP statistics. |
| free | Display free space. |
Stella commands
| Command syntax | Short description |
| stella store | Store values in eeprom |
| stella load | Load values from eeprom |
| stella cron CHANNEL VALUE MINUTE HOUR DAY MONTH DAYOFWEEK | Add a cronjob for stella to set the CHANNEL to VALUE. You may use fade channel constants. |
| channels | Return stella channel size |
| moodlight get CHANNEL | Return on if channel CHANNEL is moodlighted |
| moodlight set CHANNEL ONOFF | Set CHANNEL moodlight on=1 or off=0 |
| stella fadestep set FADESTEP | Set stella fade step |
| stella fadestep get | Get stella fade step |
| channel set CHANNEL VALUE FUNCTION | Set stella channel to value. The third parameter is optional. You may use 's' for instant set |
| channel get CHANNEL | Get stella channel value |
Cron commands
| Command syntax | Short description |
| cron_list | Show all cron entries |
| cron_rm POSITION | Remove one cron entry |
| bootloader | Call the bootloader. |
Port I/O
| Command syntax | Short description |
| io set ddr PORTNUM HEXVALUE [MASK] | Set the DDR of port PORTNUM to VALUE (possibly using the provided MASK). |
| io get ddr PORTNUM | Display the current value of the DDR PORTNUM. |
| io set port NUM HEXVALUE [MASK] | Set the PORT NUM to VALUE (possibly using the provided MASK). |
| io get port NUM | Display the current value of the PORT NUM. |
| io get pin PORTNUM | Display the current value of the PIN-register of the port PORTNUM. |
| io get mask PORTNUM | Display the mask of the port PORTNUM. |
| c6 get VARNAME | Display the current value of the ECMD_GLOBAL Variable |
| c6 set VARNAME VALUE | Set an new value on the ECMD_GLOBAL Variable |
Named Pin
| Command syntax | Short description |
| pin get NAME | Read and display the status of pin NAME. |
| pin set NAME STATUS | Set the status of pin NAME to STATUS. |
| pin toggle NAME | Toggle the status of pin NAME. |
HD44780 LCD Display
| Command syntax | Short description |
| lcd clear [LINE] | Clear line LINE (0..3) or the whole display (if parameter is omitted) |
| lcd write TEXT | Write TEXT to the current cursor location |
| lcd goto LINE COL | Move cursor to LINE and column COL (origin is 0/0) |
| lcd char N D1 D2 D3 D4 D5 D6 D7 D8 | Define use-definable char N with data D1..D8 (provide DATA in hex) |
| lcd init CURSOR BLINK | Reinitialize the display |
| lcd shift DIR | Shift the display to DIR (either left or right) |
Dallas 1-wire
| Command syntax | Short description |
| 1w list | Return a list of the connected onewire devices |
| 1w get DEVICE | Return temperature value of onewire DEVICE (provide 64-bit ID as 16-hex-digits) |
| 1w convert [DEVICE] | Trigger temperatur conversion of either DEVICE or all connected devices |
DNS
| Command syntax | Short description |
| nslookup HOSTNAME | Do DNS lookup for HOSTNAME (call twice). |
| dns server [IPADDR] | Display/Set the IP address of the DNS server to use to IPADDR. |
NTP
| Command syntax | Short description |
| ntp query | Query the NTP server to get an NTP update. |
| ntp server [IPADDR] | Display/Set the IP address of the NTP server to use to IPADDR. |
Clock
| Command syntax | Short description |
| time | Display the current time in seconds since January 1st 1970. |
| date | Display the current date. |
| whm | Display the uptime. |
ADC
| Command syntax | Short description |
| adc get [CHANNEL] | Get the ADC Value in HEX of CHANNEL or if noch channel set of all channels. |
KTY
| Command syntax | Short description |
| kty get [CHANNEL] | Get the temperature in xxx.x °C of CHANNEL or if noch channel set of all channels. |
| kty cal get | Return the calibration difference to 2k2 Resistor. |
| kty autocalibrate CHANNEL | Calibrate to 1000 Ohm precision Resistor. |
Dataflash
| Command syntax | Short description |
| df status | Display internal status. |
| fs format | Format the filesystem. |
| fs list | List the directory. |
| fs mkfile NAME | Create a new file NAME. |
| fs remove NAME | Delete the file NAME. |
| fs truncate NAME LEN | Truncate the file NAME to LEN bytes. |
| fs inspect node NODE | Inspect NODE and dump to serial. |
| fs inspect inode INODE | Inspect INODE (and associated page). |
SD/MMC Card Reader
| Command syntax | Short description |
| sd dir | List contents of current SD directory. |
RFM12
| Command syntax | Short description |
| rfm12 status | Display internal status. |
| rfm12 setbaud BAUD | Set baudrate to BAUD. |
| rfm12 setbandwidth BW | Set RX bandwidth to BW. |
| rfm12 setmod MOD | Set modulation to MOD. |
| rfm12 setgain GAIN | Set preamplifier gain to GAIN. |
| rfm12 setdrssi DRSSI | Set the drssi to DRSSI. |
| rfm12 tevion | housecode command delay cnt |
| rfm12 2272 | housecodeCommand delay cnt |
| rfm12 external filter | Toggel receiver |
Miscelleanous
| Command syntax | Short description |
| d ADDR | Dump the memory at ADDR (16 bytes). |
| help | List which commands are available. |
DC3840 Handycam support
| Command syntax | Short description |
| dc3840 capture | Make a picture |
| dc3840 send A B C D E | Send provided command bytes to the camera. |
| dc3840 sync | Re-sync to the camera |
| pwm melody | Play melody |
| pwm wav | Play wav |
| pwm stop | Stop wav |
I2C (TWI)
| Command syntax | Short description |
| i2c detect | list detected I2C Chips |
| lm75 ADDR | Get temperature |
| pca9531 ADDR PERIODPWM1 DUTYPWM1 PERIODPWM2 DUTYPWM2 LED0..3 LED4..7 | set PWM1 and PWM2 and LED states |
| pcf8574x read ADDR CHIP | Get bits |
| pcf8574x set ADDR CHIP HEXVALUE | Set bits |
| eeprom reinit | Force reinitialization of the EEPROM config area |
| mcuf modul list | List all modules |
FS20 Befehl
| Command syntax | Short description |
| fs20 send Hauscode Adresse 0x00 | turn off |
| fs20 send Hauscode Adresse 0x01 | an, 6,25% Einschalten auf Helligkeitsstufe 1 (min.) |
| fs20 send Hauscode Adresse 0x02 | an, 12,5% Einschalten auf Helligkeitsstufe 2 |
| fs20 send Hauscode Adresse 0x0f | an, 93,75% Einschalten auf Helligkeitsstufe 15 |
| fs20 send Hauscode Adresse 0x10 | an, 100% Einschalten auf Helligkeitsstufe 16 (max) |
| fs20 send Hauscode Adresse 0x11 | an, alter Wert Auf letztem Helligkeitswert einschalten |
| fs20 send Hauscode Adresse 0x12 | toggle Wechsel zwischen “aus” und “an, alter Wert“ |
| fs20 send Hauscode Adresse 0x13 | dim up Eine Helligkeitsstufe heller |
| fs20 send Hauscode Adresse 0x14 | tdim down Eine Helligkeitsstufe dunkler |
| fs20 send Hauscode Adresse 0x15 | dim up and down ..., + bis max, kurz warten, - bis min, kurz warten, |
| fs20 send Hauscode Adresse 0x16 | timeset Timerprogrammierung (Start, Ende) |
| fs20 send Hauscode Adresse 0x17 | send status Nur bei bidirektionalen Komponenten! |
| fs20 send Hauscode Adresse 0x18 | aus, für Timerzeit |
| fs20 send Hauscode Adresse 0x19 | an, 100%, für Timerzeit |
| fs20 send Hauscode Adresse 0x1A | an, alter Wert, für Timerzeit |
| fs20 send Hauscode Adresse 0x1B | reset (auf Auslieferzustand) |
FS20 CODE
| CODE' | BERECHNUNG' |
| HAUSCODE | Hauscode (12341234) Von allen Ziffern "1" abziehen (01230123) -> BC (obase=16,ibas=4) 0x1B1B |
| ADRESSE | ADRESSEGRUPPE/Unteradresse (2222 ) Von allen Ziffern "1" abziehen (1111) -> BC (obase=16,ibas=4) 0x55 |
| Lokaler Master (Adresse) | ADRESSEGRUPPE/Unteradresse (2244 ) Von allen Ziffern "1" abziehen (1133) -> BC (obase=16,ibas=4) 0x5F |
| Globaler Master (Adresse) | ADRESSEGRUPPE/Unteradresse (4444 ) Von allen Ziffern "1" abziehen (3333) -> BC (obase=16,ibas=4) 0xFF |
Other Information
See ECMD Protocols on how ECMD can be called from various protocols.
