Ecmd Reference: Unterschied zwischen den Versionen
(→Anpassung an aktuelle Syntax im GIT) |
|||
Zeile 170: | Zeile 170: | ||
| Do DNS lookup for HOSTNAME (call twice). | | Do DNS lookup for HOSTNAME (call twice). | ||
|- | |- | ||
− | | show dns | + | | show dns server |
| Display the IP address of the configured DNS server. | | Display the IP address of the configured DNS server. | ||
|- | |- | ||
− | | dns IPADDR | + | | dns server IPADDR |
| Set the IP address of the DNS server to use to IPADDR. | | Set the IP address of the DNS server to use to IPADDR. | ||
|- | |- | ||
|} | |} | ||
+ | |||
== SYSLOG == | == SYSLOG == | ||
{| border="1" | {| border="1" |
Version vom 19. Mai 2009, 10:47 Uhr
This page is automatically generated from ecmd_defs.m4 and wiki.m4 which are part of the Ethersex source code repository. Do not edit this page but send pages for those files!
Inhaltsverzeichnis
- 1 Network configuration
- 2 Resetting the controller
- 3 Stella commands
- 4 Port I/O
- 5 Named Pin
- 6 HD44780 LCD Display
- 7 Dallas 1-wire
- 8 DNS
- 9 SYSLOG
- 10 Clock
- 11 ADC
- 12 KTY
- 13 Dataflash
- 14 SD/MMC Card Reader
- 15 RFM12
- 16 Miscelleanous
- 17 DC3840 Handycam support
- 18 I2C (TWI)
- 19 FS20 Befehl
- 20 FS20 CODE
- 21 ECMD mit BROWSER
Network configuration
Command syntax | Short description |
mac xx:xx:xx:xx:xx:xx | Set the MAC address. |
show mac | Display the MAC address. |
show ip | Display the IP address. |
show netmask | Display the network mask. |
show gw | Display the IP address of the default router. |
show version | Display the version number. |
ip IP | Set the IP address. |
netmask IP | Set the network mask. |
gw IP | Set the address of the default router. |
Resetting the controller
Command syntax | Short description |
reset | Reset the Ethersex. |
wdreset | Go into endless loop to trigger a watchdog timeout. |
Stella commands
Command syntax | Short description |
stella store | Store values in eeprom |
stella load | Load values from eeprom |
channels CHANNELS | Return stella channel size |
stella version STELLAVERSION | Get stella protocol version |
stella fadestep set FADESTEP | Set stella fade step |
stella fadestep get | Get stella fade step |
channel set CHANNEL VALUE | Set stella channel value |
channel get CHANNEL | Get stella channel value |
bootloader | Call the bootloader. |
Port I/O
Command syntax | Short description |
io set ddr PORTNUM HEXVALUE [MASK] | Set the DDR of port PORTNUM to VALUE (possibly using the provided MASK). |
io get ddr PORTNUM | Display the current value of the DDR PORTNUM. |
io set port NUM HEXVALUE [MASK] | Set the PORT NUM to VALUE (possibly using the provided MASK). |
io get port NUM | Display the current value of the PORT NUM. |
io get pin PORTNUM | Display the current value of the PIN-register of the port PORTNUM. |
io get mask PORTNUM | Display the mask of the port PORTNUM. |
c6 get VARNAME | Display the current value of the ECMD_GLOBAL Variable |
c6 set VARNAME VALUE | Set an new value on the ECMD_GLOBAL Variable |
Named Pin
Command syntax | Short description |
pin get NAME | Read and display the status of pin NAME. |
pin set NAME STATUS | Set the status of pin NAME to STATUS. |
pin toggle NAME | Toggle the status of pin NAME. |
HD44780 LCD Display
Command syntax | Short description |
lcd clear [LINE] | Clear line LINE (0..3) or the whole display (if parameter is omitted) |
lcd write TEXT | Write TEXT to the current cursor location |
lcd goto LINE COL | Move cursor to LINE and column COL (origin is 0/0) |
lcd char N D1 D2 D3 D4 D5 D6 D7 D8 | Define use-definable char N with data D1..D8 (provide DATA in hex) |
lcd init CURSOR BLINK | Reinitialize the display |
lcd shift DIR | Shift the display to DIR (either left or right) |
Dallas 1-wire
Command syntax | Short description |
1w list | Return a list of the connected onewire devices |
1w get DEVICE | Return temperature value of onewire DEVICE (provide 64-bit ID as 16-hex-digits) |
1w convert [DEVICE] | Trigger temperatur conversion of either DEVICE or all connected devices |
DNS
Command syntax | Short description |
nslookup HOSTNAME | Do DNS lookup for HOSTNAME (call twice). |
show dns server | Display the IP address of the configured DNS server. |
dns server IPADDR | Set the IP address of the DNS server to use to IPADDR. |
SYSLOG
Command syntax | Short description |
syslog STRING | Send string to syslog server. |
show syslog | Display the IP address of the configured SYSLOG server. |
Clock
Command syntax | Short description |
time | Display the current time. |
date | Display the current date. |
whm | Display the uptime. |
ADC
Command syntax | Short description |
adc get [CHANNEL] | Get the ADC Value in HEX of CHANNEL or if noch channel set of all channels. |
KTY
Command syntax | Short description |
kty get [CHANNEL] | Get the temperature in xxx.x °C of CHANNEL or if noch channel set of all channels. |
kty cal get | Return the calibration difference to 2k2 Resistor. |
kty autocalibrate CHANNEL | Calibrate to 1000 Ohm precision Resistor. |
Dataflash
Command syntax | Short description |
df status | Display internal status. |
fs format | Format the filesystem. |
fs list | List the directory. |
fs mkfile NAME | Create a new file NAME. |
fs remove NAME | Delete the file NAME. |
fs truncate NAME LEN | Truncate the file NAME to LEN bytes. |
fs inspect node NODE | Inspect NODE and dump to serial. |
fs inspect inode INODE | Inspect INODE (and associated page). |
SD/MMC Card Reader
Command syntax | Short description |
sd dir | List contents of current SD directory. |
RFM12
Command syntax | Short description |
rfm12 status | Display internal status. |
rfm12 setbaud BAUD | Set baudrate to BAUD. |
rfm12 setbandwidth BW | Set RX bandwidth to BW. |
rfm12 setmod MOD | Set modulation to MOD. |
rfm12 setgain GAIN | Set preamplifier gain to GAIN. |
rfm12 setdrssi DRSSI | Set the drssi to DRSSI. |
rfm12 tevion | housecode command delay cnt |
rfm12 2272 | housecodeCommand delay cnt |
rfm12 external filter | Toggel receiver |
Miscelleanous
Command syntax | Short description |
d ADDR | Dump the memory at ADDR (16 bytes). |
help | List which commands are available. |
DC3840 Handycam support
Command syntax | Short description |
dc3840 capture | Make a picture |
dc3840 send A B C D E | Send provided command bytes to the camera. |
dc3840 sync | Re-sync to the camera |
pwm | start pwm |
I2C (TWI)
Command syntax | Short description |
i2c detect | list detected I2C Chips |
lm75 ADDR | Get temperature |
pca9531 ADDR PERIODPWM1 DUTYPWM1 PERIODPWM2 DUTYPWM2 LED0..3 LED4..7 | set PWM1 and PWM2 and LED states |
pcf8574x read ADDR CHIP | Get bits |
pcf8574x set ADDR CHIP HEXVALUE | Set bits |
eeprom reinit | Force reinitialization of the EEPROM config area |
FS20 Befehl
Command syntax | Short description |
fs20 send Hauscode Adresse 0x00 | turn off |
fs20 send Hauscode Adresse 0x01 | an, 6,25% Einschalten auf Helligkeitsstufe 1 (min.) |
fs20 send Hauscode Adresse 0x02 | an, 12,5% Einschalten auf Helligkeitsstufe 2 |
fs20 send Hauscode Adresse 0x0f | an, 93,75% Einschalten auf Helligkeitsstufe 15 |
fs20 send Hauscode Adresse 0x10 | an, 100% Einschalten auf Helligkeitsstufe 16 (max) |
fs20 send Hauscode Adresse 0x11 | an, alter Wert Auf letztem Helligkeitswert einschalten |
fs20 send Hauscode Adresse 0x12 | toggle Wechsel zwischen “aus” und “an, alter Wert“ |
fs20 send Hauscode Adresse 0x13 | dim up Eine Helligkeitsstufe heller |
fs20 send Hauscode Adresse 0x14 | tdim down Eine Helligkeitsstufe dunkler |
fs20 send Hauscode Adresse 0x15 | dim up and down ..., + bis max, kurz warten, - bis min, kurz warten, |
fs20 send Hauscode Adresse 0x16 | timeset Timerprogrammierung (Start, Ende) |
fs20 send Hauscode Adresse 0x17 | send status Nur bei bidirektionalen Komponenten! |
fs20 send Hauscode Adresse 0x18 | aus, für Timerzeit |
fs20 send Hauscode Adresse 0x19 | an, 100%, für Timerzeit |
fs20 send Hauscode Adresse 0x1A | an, alter Wert, für Timerzeit |
fs20 send Hauscode Adresse 0x1B | reset (auf Auslieferzustand) |
FS20 CODE
CODE' | BERECHNUNG' |
HAUSCODE | Hauscode (12341234) Von allen Ziffern "1" abziehen (01230123) -> BC (obase=16,ibas=4) 0x1B1B |
ADRESSE | ADRESSEGRUPPE/Unteradresse (2222 ) Von allen Ziffern "1" abziehen (1111) -> BC (obase=16,ibas=4) 0x55 |
Lokaler Master (Adresse) | ADRESSEGRUPPE/Unteradresse (2244 ) Von allen Ziffern "1" abziehen (1133) -> BC (obase=16,ibas=4) 0x5F |
Globaler Master (Adresse) | ADRESSEGRUPPE/Unteradresse (4444 ) Von allen Ziffern "1" abziehen (3333) -> BC (obase=16,ibas=4) 0xFF |
ECMD mit BROWSER
h t t p ://IP-ETHERSEX/ecmd?show+ip' |